Vending machine accessories European ground wire connecting piece will be the grounding soft copper wire phase on the binocular copper nose fixed on the grounding rod on the corresponding position of the power clip (the power clamp has fixed and movable type), and the monocular copper nose on the grounding wire conjunction is fixed on the grounding clip or ground needle to form a complete set of grounding wire. One end is connected to the ground jack contact, and the other end is connected to earth.

If it is a mobile socket, it is recommended to connect an iron nail to the end of the earth connection wire, and plug it in as you go. Do not touch the ground wire when powering on. If you want to use it for lightning rods, you must also add a copper plate at the bottom of the conductor, with an area greater than 40 square centimeters, and you can add a little salt around it.

The ground wire of some electric soldering irons is directly connected to the ground pin in the triangular plug, so that the electric soldering iron can be inserted into the socket that has been normally connected to the ground wire, and the ground wire is directly grounded through the socket ground wire. More electric soldering iron ground wires are connected to a separate alligator clip, which can be clamped to the shell of the equipment that is already grounded, such as the grounded computer host chassis metal plate, if it is not convenient to ground through the power distribution system.